Nucleic acid related compounds. 31. Smooth and efficient palladium-copper catalyzed coupling of terminal alkynes with 5-iodouracil nucleosides

Coupling of terminal alkynes with protected 5-iodouracil nucleosides in the presence of dichlorobis(triphenylphosphine)palladium and copper(I) iodide in triethylamine gives the corresponding 5-(alkyn-1-yl)uracil nucleosides in 72–92% yields.     

High frequency titrations involving chelation with ethylenediaminetetra-acetic acid. II. quantitative determination of some divalent metals

The high frequency oscillator provides an excellent means of detecting the end-points of titrations performed with ethylenediaminetetraacetic acid or its salts. The determination of various divalent metals is reported, based on both direct and indirect titrations. Because of the great sensitivity of the method it is possible to determine cobalt, nickel, copper (II), zinc, cadmium, lead and manganese (II) in concentration ranges of 1/1000 to 1/6000M.     

Two types of intramolecular addition of an Al-N multiple-bonded monomer LAlNAr' arising from the reaction of LAl with N3Ar' (L = HC[(CMe)(NAr)]2, Ar' = 2,6-Ar2C6H3, Ar = 2,6-iPr2C6H3)

The reaction of beta-diketiminated aluminum(I) monomer LAl with a large bulky azide N3Ar' (L = HC(CMeNAr)2, Ar' = 2,6-Ar2C6H3, Ar = 2,6-iPr2C6H3) in the temperature range from -78 degrees C to room temperature affords two different isomers 2 and 3, which have been characterized by spectroscopic and X-ray structural analyses, as well as elemental analysis. The variable-temperature 1H NMR kinetic studies of this reaction indicate the existence of the monomer LAlNAr' (1) at low temperature and the thermal stability of the compounds increases in the order of 1 < 2 < 3.     

Di‐2‐pyridyl ketone N4,N4‐(butane‐1,4‐diyl)thiosemicarbazone

The title compound, C₁₆H₁₇N₅S, is in the thione form and crystallizes with two independent mol­ecules in the asymmetric unit. In both mol­ecules, the penta­methyl­ene­imine five‐membered ring adopts an envelope conformation, and in one of the molecules this ring shows positional disorder. The thione S and hydrazine N atoms are in the Z configuration with respect to the C—N bond.     

Matrix element factorization in the unitary group approach for configuration interaction calculations

Techniques of diagrammatic spin algebra are employed to derive segment factorization formulas for spin-adapted matrix elements of one- and two-electron excitation operators. The spin-adapted basis is formed by the Yamanouchi–;Kotani geneological coupling method, and therefore constitutes an irreducible basis of the unitary group U(N), as prescribed by Gel'fand and Tsetlin. Several features distinguish this paper from similar work that has recently been published. First, intermediate steps in the derivation of each segment factor are fully documented. Comprehensive tables list the spin diagrams and phases that contribute to the possible segment factors. Second, a special effort has been made to distinguish between those parts of a segment factor that can be ascribed to a spin diagram and those parts which arise from the orbitals. The results of this paper should thus be useful for those who wish to extend diagrammatic spin algebra to evaluation of matrix elements for states built from nonorthogonal orbitals. Third, a novel graphical method has been introduced to keep track of phase changes that are induced by line up permutations of creation and annihilation operators. This technique may be useful for extension of our analysis to higher excitations. The necessary concepts of second quantization and diagrammatic spin algebra are developed in situ, so the present derivation should be accessible to those who have little prior knowledge of such methods.     

Spherical coordinate representations of solvent composition for liquid chromatography method development using experimental design

One of the major techniques used for the method development of ternary and quaternary high performance liquid chromatography (HPLC) systems has been to use mixture designs, often referred to as "Glajch's Triangle". This technique does not allow for the systematic and simultaneous optimization of other factors such as gradient time, pH and temperature that affect the quality of separations. An alternative approach is to use experimental designs. The condition, however, that the composition of all components of the mobile phase must total 100% presents a problem when trying to mathematically represent ranges of each mobile phase constituent of a ternary or quaternary system. A method is described here, based on spherical coordinate representations, that adheres to the constraints of the mobile phase composition and allows experimental designs, such as central composite and factorial designs, to be applied to the simultaneous optimization of the mobile phase composition. Other factors, in particular temperature and gradient time, can then be included in the design. As a result of applying these designs to the HPLC separation of phenols and corticosteroids, it was found necessary to include three-way interactions between experimental factors in the model. The significance of these interactions shows that they need to be considered in HPLC method development.     

Adsorption of Molybdenum on Titania from Aqueous Solutions

The adsorption of Mo from dilute aqueous solutions (10(-3) to 3x10(-2) M) is effected on three samples of titania, two are anatase and the third is P25, which is composed of rutile and anatase. The adsorption isotherms at 298, 318, and 338 K are analyzed using a Langmuir linear equation. The isotherms on P25 showed a distinct inflection point that is reproduced by two linear portions, indicating different adsorption regimes. This adsorption behavior is explained as follows: with low amount adsorbed the adsorption is initiated by protonation of the basic hydroxyls on which the negatively charged MoO(4)(2-')s are adsorbed, and this is accompanied by an increase in the pH of the impregnating solution. At higher adsorption the coordinatively unsaturated Ti(4+) sites participate in the process, leading to a decline in the initial increase in pH. In the case of the two anatase samples the low surface area resulted in poor distribution of adsorption sites; consequently, the distinction between the two modes of adsorption was not entirely clear. The higher adsorption site density in the case of anatase is accompanied by a lower surface coverage, θ, than that for P25. The heat of adsorption, Q, on the three titania samples showed a linear increase with θ, which is represented by the regression equation: -Q=95.77θ-4.25 (R(2)=0.993). Copyright 2001 Academic Press.     

Synthesis and structural characterization of [PhE(BNMe2)2]2 (E = P or As): Six-Membered P2B4 and As2B4 Rings with Unusual Structures

The reaction of either Li₂PPh or Li₂AsPh with the diborane(4) derivative B₂(NMe₂)₂Br₂ affords the compounds [PhP(BNMe₂)₂]₂ ( 1 ) or [PhAs(BNMe₂)₂]₂ ( 2 ) in good yield. Both 1 and 2 have cyclic structures featuring non-planar P₂B₄ or As₂B₄ six-membered rings which have chair configurations. Although all four borons in each ring have planar coordination, the two phosphorus or arsenic centers have different degrees of pyramidalization. Bond distances within the rings indicate that the B? B, B? P or B? As bonds are single, whereas the exo-B? N bond lengths are consistent with significant π-bonding. The ring structures of 1 and 2 are in sharp contrast to the related boron-nitrogen species (t-BuN)₂N₄Me₄ which has a nido-N₂B₄ framework. The attempted synthesis of the nitrogen analogue of 1 or 2 by using a similar approach did not result in the isolation of [PhN(BNMe₂)₂]₂, instead the tetramino diborane(4) species [B(NMe₂)NHPh]₂ ( 3 ), which has a structure similar to other tetramine diborane(4) compounds, was isolated.     

Determination of avermectins in plasma at nanogram levels using high-performance liquid chromatography with flourescence detection

An analytical method is described for the determination of the avermectins in plasma based upon high-performance liquid chromatography of flourescent derivatives of these compounds. The analyte is isolated by adsorption chromatography on Florisil, dehydrated in an acetic anhydride-pyridine mixture, and the fluorophore is further separated by chromatorgraphy on silica gel in advance of introduction into a reversed-phase system. This method, which can be applied to samples containing as little as 0.2 ng drug per ml, has an accuracy of 5% mean relative error and a precision of 8% relative standard deviation. A study and discussion of several factors which affect the analytical reaction are included.     

The phase-dependent photochemical reaction dynamics of halooxides and nitrosyl halides

Recent progress in understanding the phase-dependent reactivity of halooxides and nitrosyl halides is outlined. Halooxide reactivity is represented by the photochemistry of chlorine dioxide (OClO) and dichlorine monoxide (ClOCl). The gas phase photochemical dynamics of OClO are contrasted with the dynamics in condensed environments. The role of excited-state symmetry in defining the reaction dynamics and the observation of photoisomerization resulting in the production of ClOO are discussed. The current understanding of the excited-state reaction dynamics of ClOCl and evidence for photoisomerization of this species resulting in the production of ClClO are outlined. Finally, the photochemical reaction dynamics of the nitrosyl halide ClNO are presented. The main difference between the gas and condensed phase reaction dynamics of this species is that whereas photodissociation to form Cl and NO dominates the gas phase reaction dynamics, photoisomerization resulting in ClON production occurs to an appreciable extent in condensed environments. The observation of photoisomerization for OClO, ClOCl and ClNO suggests that this process is a general feature of the condensed phase reaction dynamics for smaller halooxides and nitrosyl halides. Finally, future areas for study in both halooxide and nitrosyl halide photoreactivity are outlined.